SAMES KREMLIN

The experts in fine finish paint spray finishing equipment and dispensing solutions, Exel North America, has quality finishing equipment for the ultimate in fine finish results. When your fluid handling requirements are for only the best quality, look no further than Kremlin air assisted airless paint spray equipment.

Air Assisted Airless Finishing Equipment

When only the most fine finish spray coating will do, Kremlin air assisted airless spray equipment can certainly help with that. Exel North America offers several different pumps for a variety of different circumstances. Whether it is the 08.120 pump for circulating and large production, 10.25 GT pump which is ideal for water-based and high solids materials or the 20.220F FLOWMAX pump for high output, you can always find exactly what you need for the job. In addition, when combined with either the MVX or XCITE spray guns, one can maximize the efficiency of their airmix setup.

High Pressure Hose and Spray Tips

High pressure hose is an essential part in transporting the spray coating to its destination. For a flexible yet durable paint spray hose, the most common 3/16” ID by 25’ Kremlin air assisted airless hose is ideal for most applications. Paired with stainless steel fittings, you will have no problems with a wide variety of spray coatings on the market. Additional inside diameter hoses available such as 1/8” ID airless hose for when a very thin spray coating is being used and 1/4" ID paint hose for the thicker options.

Quality Kremlin double notch air assisted airless spray tips are the next essential part in your airmix system. These spray tips with improve transfer efficiency and is designed to achieve a soft spray coating. These Kremlin air assisted airless tips come in a wide variety of different fan patterns and orifice combinations so choosing the right tip can be challenging at times; however, when selecting the proper spray tip for the job, you will certainly solve all of your fluid dynamic requirements simply and easily.

Accessories

Several imperative accessories will help to keep the operator as well as your Kremlin finishing equipment operating at peak performance. Our high pressure gun swivel will help in providing a kink free hose while allowing easy mobility into those difficult to access areas. Ultimately, this will help to reduce tension on the painter’s wrist allowing them to work easier and be more efficient with their time. Another essential accessory is tip cleaning needles. These tip broaches will help to clean even the smallest of paint spray tips allowing them to remain in tip top shape. In addition, other popular accessories include paint filters, couplings and adaptors.

Part Number Main Description Price Qty Place Order
38-K111

KREMLIN AIRCAP VX 14 WITH ADJUSTABLE FLOW RATE

OEM PART NUMBER 132-670-920

$98.50

38-K112

KREMLIN AIRCAP VX114 WITH PERMANENT PATTERN

OEM PART NUMBER 132-670-040

$98.50

38-K113

KREMLIN AIRCAP VX24 WITH ADJUSTABLE FLOW RATE

OEM PART NUMBER 132-720-020

$98.50

38-K121

KREMLIN SEAL FOR AIRCAP QTY 2

OEM PART NUUMBER 129-670-075

$12.50

38-K122

KREMLIN SEAL FOR AIRCAP QTY 10

OEM PART NUMBER 150-040-330

$25.00

38-K123

KREMLIN HOLDER ASSEMBLY FOR SEAT (SEAT NOT INCLUDED)

OEM PART NUMBER 129-679-907

$40.00

38-K124

KREMLIN O-RING SEAL QTY 10

OEM PART NUMBER 150-040-329 

$25.00

38-K125

KREMLIN DIFFUSER KIT COMPLETE

OEM PART NUMBER 129-729-907

$62.50

38-K126

KREMLIN SEAL FRONT GASKET FOR DIFFUSER QTY 5

OEM PART NUMBER 129-729-912

$37.50

38-K127

KREMLIN SEAL REAR GASKET FOR DIFFUSER QTY 10

OEM PART NUMBER 129-729-913

$36.00

38-K131

KREMLIN SCREW

OEM PART NUMBER 029-600-106 

$10.00

38-K132

KREMLIN SEAT ACETAL RESIN FOR NEEDLE QTY 10

OEM PART NUMBER 129-679-904

$35.00

38-K133

KREMLIN SEAT ACETAL RESIN QTY 10

OEM PART NUMBER 129-609-911

$35.00

38-K141

KREMLIN SEAT IN SS WITH SEAL, QTY 2

OEM PART NUMBER 129-729-905

$37.50

38-K142

KREMLIN COMPLETE NEEDLE KIT 120 BAR

OEM PART NUMBER 129-720-150

$112.00

38-K143

KREMLIN NEEDLE KIT COMPLETE 200 BAR

OEM PART NUMBER 129-720-250

$125.00

38-K151

KREMLIN O-RING GASKET CARTRIDGE NEEDLE QTY 10

OEM PART NUMBER 109-420-298 

$14.75

38-K152

KREMLIN NEEDLE CARTRIDGE ASSEMBLY

OEM PART NUMBER 129-626-100

$82.50

38-K153

KREMLIN O-RING VITON, QTY 10

OEM PART NUMBER 129-529-906

$17.50

38-K154

KREMLIN NEEDLE CARTRIDGE ASSEMBLY QTY 4

OEM PART NUMBER 129-690-050

$337.50

38-K155

KREMLIN CARTRIDGE WITH SEAL

OEM PART NUMBER 129-690-039

$47.50

38-K161

KREMLIN SEAL WHITE PLYFLUID KMX3

OEM PART NUMBER 909-429-702

$15.00

38-K162

KREMLIN RETAINER NEEDLE

OEM PART NUMBER 029-626-200

$12.50

38-K163

KREMLIN O-RING GASKET FOR RETAINER NEEDLE QTY 10

OEM PART NUMBER 129-400-915

$12.50

38-K164

KREMLIN NUT SPECIAL

OEM PART NUMBER 029-251-303

$9.00

38-K165

KREMLIN FLUID LEAKAGE DETECTOR

OEM PART NUMBER 029-690-001

$27.50

38-K166

KREMLIN SEAL R8 QTY 10

OEM PART NUMBER 129-251-992

$40.00

38-K167

KREMLIN SEAL R22, QTY 10

OEM PART NUMBER 129-251-993

$38.00

38-K171

KREMLIN O-RING QTY 10

OEM PART NUMBER 150-040-328

$12.50

38-K172

KREMLIN SEAL TEFLON QTY 10

OEM PART NUMBER 129-251-991

$20.00

38-K173

KREMLIN SEAL TEFLON ATX BASE QTY 10

OEM PART NUMBER 129-525-092

$22.50

38-K181

KREMLIN O-RING TEFLON FOR TIP QTY 10

OEM PART NUMBER 129-529-903

$20.00

38-K182

KREMLIN PUMP REPAIR KIT PACKING HYD C25

OEM PART NUMBER 144-130-205

$132.50

38-K186 AIRCAP RING TO CONVERT KREMLIN TO EXITFLEX TRI-A
$12.50

38-K187

KREMLIN SEAL SEAT IN DELRIN QTY 10

OEM PART NUMBER 129-629-922

$25.00

38-K188

KREMLIN SEAT IN SS WITH SEAL QTY 2

OEM PART NUMBER 129-679-905

$37.50

38-K192

KREMLIN SUCTION FILTER F18X1 (15 MESH)

OEM PART NUMBER 149-596-052

$24.00

38-K101

KREMLIN SPRING SUPPORT IN SS

OEM PART NUMBER 055-190-005 

$9.00

 

HIGH PRESSURE BALL VALVES

Carbon steel construction. Maximum Working Pressure is 7,250 PSI.

75-004

Part Number Main Description Price Qty Place Order
75-004

1/4” NPT (M) x 1/4" NPT (M)

$24.50

75-006

3/8” NPT (M) x 3/8" NPT (M)

$28.50

 

HIGH PRESSURE SCREEN FILTERS

Four mesh sizes available. Compatible to Kremlin 000-161-XXX.

36-712

Part Number Main Description Price Qty Place Order
36-712 55 Mesh
$20.50

36-709 60 Mesh
36-706 85 Mesh
36-704 140 Mesh
$20.50

 

TIP SIEVES

Compatible to Kremlin 129-609-XXX.

36-1050

Part Number Main Description Price Qty Place Order
36-1050 50 Mesh (per 5)
$5.00

36-1051 100 Mesh (per 5)
$5.00

36-1052 200 Mesh (per 5)
$5.00

36-1000 Stainless Steel Support
$15.50

 

MICRO TIP FILTER

Fits behind most AAA tip designs, serving as both a filter and pre-orifice.

36-610

Part Number Main Description Price Qty Place Order
36-610 100 Mesh (pack of 10 filters)
$29.20

  Loading...